The Genesis Series presses are built to provide unmatched accuracy and reliability for compression and transfer molding. Can be offered with conventional tie bar design or rectangular gibb guided columns to provide better process control.
Presses are available in sizes that range from 60 Tons to 600 Tons and all presses utilize the latest in LMG's hydraulic and control technology. This makes the Genesis Series the most technologically advanced press available to meet the high demands for today's molding challenges.
|Clamp Tonnage (U.S.)||60||90||130||165||220||300|
|Clamp Stroke (inches)||10||12||12||12||18||24|
|Clamp Daylight (inches)||25.5||28||30||30||40||40|
|Mold Spcaing L to R (inches)||22||25||28||32.5||32.5||40|
|Mold Spcaing Front to Back (inches)||22||25||28||34.5||39||39|
|Fast Close Speed Max (IPM)||250||300||375||375||250||250|
|Slow Close Speed Max (IPM)||25||30||60||60||60||25|
|Fast Open Speed Max (IPM)||135||150||450||450||300||300|
|Transfer Tonnage (U.S.)||5||8.3||8.3||12||40||40|
|Transfer Stroke (inches)||12||16||16||16||16||16|
|Transfer Fast Advance Speed Max (IPS)||9||9||9||6||4||4|
|Transfer Slow Advance Speed Max (IPS)||3||3||3||2||1||1|